24/7 Phone Services +91 7045400008
sales@sambhavpipes.com Opera House Charni Road East, Girgaon, Mumbai

904l Stainless Steel Sheet

Certified Stainless Steel 904L Plate Supplier in india can come in various sizes and grades at best price

 

904l Stainless Steel Sheet

 

Table of Content

 

As the India's largest independent ASTM B625 UNS N08904 Strip stockist, Keep Bulk Stock of SS 904l Plate at our stockyard

 

904l Stainless Steel Sheet

 

Stainless Steel 904l Vs 316l

The primary difference between Stainless Steel 904l and 316l is in their chemical composition. The 904L grade contains more nickel, chromium and molybdenum in its alloy, along with other elements like manganese, copper and silicon, compared to the 316L ss. This makes 904L more resistant to corrosion than 316L ss. The 904L has a higher price as processing it is much harder compared to the 316L grade.

 

What is 904l stainless steel sheet ?

The Stainless Steel 904L Plate material is an austenitic steel , which comes with added molybdenum. It has superior resistance to localized attacks and it shows good resistance in the sulphuric acid environments. The SS 904l Plate also resists chloride related stress corrosion cracking and due to its low carbon content, it is resistant to sensitization by welding, which in turn, prevents intergranular corrosion.

Due to all these properties, the SS 904L Sheet is widely used in piping systems, pollution control equipment, heat exchangers, etc. The 904l stainless plate possesses excellent weldability, formability, and toughness. It is non-magnetic and can effectively resist crevice corrosion. However, due to the presence of expensive elements like molybdenum and nickel in its chemical composition, the 904l steel plate is quite highly priced.

 

Stainless Steel 904l Vs 304

SS 904L is a non-stabilized low carbon steel with added copper to improve its resisting capacities in various acidic environments. It is also resistant to general and crevice corrosion, and is non-magnetic in nature. Due to the presence of expensive elements like molybdenum and nickel in its chemical composition, 904L material is quite expensive.304L ss is the low carbon variant of 304 and it comes with high weldability. It is used in extremely corrosive environments and the material is quite affordable.

 

What is Stainless Steel 904l Properties

The Stainless Steel 904l Properties would include moderate to high corrosion resistance in a wide range of environments. It is resistant to sensitization caused by welding and also is resistant to intergranular corrosion.

 

Stainless Steel 904L Plate Specification
ASME/ASTM Grade ASME SB625/ASTM B625
Supply Length 3000mm, 2440mm, 6000mm, 2000mm, 5800mm, etc
Thickness 4 to 100mm
Width Available
3000mm, 1800mm, 2000mm, 1500mm, 2500mm, 1000mm, 3500mm, 1219mm etc
Surface types etching, hair line, NO.1, sand blast, embossed, Brush, 2D, 2B, BA, NO.8, checkered, NO.4, 8K, mirror, etc
Most Commom Finish 2B, BA NO(8), Cold rolled sheet (CR), SATIN (Met with Plastic Coated), 2D, HR plate
Available Plate Form with us Blank (Circle), Shim Sheet, Perforated Sheet, Foils, Coils, Plain Sheet, Flats, Strip, Rolls, Chequered Plate, Ring (Flange) etc.

 

SS 904L Sheet Price
Description Price
Stainless Sheet for Grade 904L US $ 4-22 / Piece
904L Stainless Plate Sheet with 2b/No. 1 US $ 1406-4339 / Ton
Hot Rolled 2mm 3mm 5mm Thick 904L Stainless Sheet for Decoration Materials  US $ 1000-2500 / Ton
904L Hot/Cold Rolled/Mirror Stainless Sheet US $ 0.2-2.5 / kg
904L Stainless Steel Sheet US $ 0.5-2.5 / kg
904L Grade Hot Cold Rolled Stainless Sheet US $ 1580-1860 / Ton
Hot Rolled ASTM 904L Acid-Resistant 2b Stainless Sheet US $ 800-3000 / Ton
JIS 904L Stainless Sheet with Nice Surface US $ 2-22 / Piece
904L No. 1 8K SS Sheet  US $ 400-2000 / Ton

 

904l Plate Weight
Weight per
sheet (Kg)
Size (mm) Weight per
sheet (Kg)
Size (mm)
23.0 2500 x1250 x 0.9 51.2 2500 x 1250 x 2.0
11.5 2000 x1000 x 0.7 38.4 2500 x 1250 x 1.5
14.7 2000 x1000 x 0.9 32.7 2000 x 1000 x 2.0
30.7 2500 x1250 x 1.2 49.6 2000 x 1000 x 3.0
17.9 2500 x1250 x 0.7 55.3 3000 x 1500 x 1.5
16.4 2000 x1000 x 1.0 73.7 3000 x 1500 x 2.0
25.6 2500 x1250 x 1.0 40.9 2000 x 1000 x 2.5
19.6 2000 x1000 x 1.2 92.1 3000 x 1500 x 2.5
36.8 3000 x1500 x 1.0 63.9 2500 x 1250 x 2.5
44.2 3000 x1500 x 1.2 77.5 2500 x 1250 x 3.0
24.6 2000 x1000 x 1.5 112.0 3000 x 1500 x 3.0

 

We Guarantee Fastest Delivery of WERKSTOFF NR. 1.4539 Coil and Foil with All Documents Including Mill Certificate

 

List of 904l Stainless Steel Sheet Types
WERKSTOFF NR. 1.4539 Coil
WERKSTOFF NR. 1.4539 Coil
ASTM B625 UNS N08904 Strip
ASTM B625 UNS N08904 Strip
904l Sheet
904l Sheet
Stainless Steel 904L Plate
Stainless Steel 904L Plate
904l Stainless Steel Sheet
904l Stainless Steel Sheet
SS 904l Perforated Sheet
SS 904l Perforated Sheet

 

SS 904L Sheet Weight Calculator

Please enter values then click on Calculate.

Length (inches) =
Width (inches) =
Thickness (inches) =
 
Weights (pounds) =

All are estimates; actual may differ.

 

With over 20 years experience of SS 904L Perforated Sheet stockholding, we processes and distributes only the highest quality 904l Sheet throughout the world

 

Look what we supply and where ?
904L Cold Rolled Hot Rolled 2b Ba Finish 0.3mm Stainless Steel Sheet
904L Cold Rolled Hot Rolled 2b Ba Finish 0.3mm Stainless Steel Sheet
PetroSA, South Africa
904 2b/No. 1/Ba Mirror Surface Stainless Steel Sheet
904 2b/No. 1/Ba Mirror Surface Stainless Steel Sheet
Pertamina, Indonesia
904l stainless plate
904l stainless plate
Imperial Oil Limited, Canada

 

Stainless Steel 904l Vs 316l

Low carbon variants of their respective grades are 904l and 316l. The amount of nickel, chromium, and molybdenum in their chemical compositions is the most significant difference between them. These compounds are slightly more abundant in 904l, making it more resistant to corrosion and pitting by chlorides in various conditions. However, compared to stainless steel sheet 904l, 316l is less expensive and more readily accessible.

 

ASTM B625 Type 904L Plate Gauge
METAL GAUGE NOMINAL DECIMAL  (+/- INCHES) (APPROXIMATE INCHES)
8 0.0080 0.1644
7 0.0080 0.1793
10 0.0070 0.1345
11 0.0050 0.1196
9 0.0080 0.1495
12 0.0050 0.1046
26 0.0015 0.0179
14 0.0040 0.0747
15 0.0040 0.0673
13 0.0050 0.0897
16 0.0030 0.0598
18 0.0030 0.0478
17 0.0030 0.0538
19 0.0030 0.0418
21 0.0025 0.0329
20 0.0030 0.0359
22 0.0020 0.0299
24 0.0020 0.0239
23 0.0020 0.0269
28 0.0010 0.0149
25 0.0015 0.0209

 

UNS N08904 Strip Density
Density
Melting Range

7.95 g/cm3
0.287 lbs/in3

1300 – 1390°C
2372 – 2534°F

 

Get complete information aboutStainless Steel 904L hot Rolled Plate Thickness/Specifications/Weight online here

 

SS 904L Sheet Thickness
Thickness Size Range Thickness Surface Area per Unit weight Approx Weight per Sheet
inches mm kg/m² lbs/ft² kg lbs
0.015 36 x 120 0.381 3.07566 0.630 8.5617 18.90
0.015 36 x 96 0.381 3.07566 0.630 6.84936 15.12
0.0178 36 x 120 0.45212 3.690792 0.756 10.27404 22.68
0.0178 36 x 96 0.45212 3.690792 0.756 8.22195 18.15
0.0178 48 x 120 0.45212 3.690792 0.756 13.69872 30.24
0.0178 48 x 96 0.45212 3.690792 0.756 10.95807 24.19
0.0235 30 x 120 0.5969 4.921056 1.008 11.4156 25.20
0.0235 30 x 96 0.5969 4.921056 1.008 9.13248 20.16
0.0235 36 x 120 0.5969 4.921056 1.008 13.69872 30.24
0.0235 36 x 96 0.5969 4.921056 1.008 10.95807 24.19
0.0355 36 x 96 0.9017 7.381584 1.512 16.43937 36.29
0.0235 48 x 96 0.5969 4.921056 1.008 14.61378 32.26
0.0235 36 x 144 0.5969 4.921056 1.008 16.43937 36.29
0.0235 48 x 120 0.5969 4.921056 1.008 18.26496 40.32
0.0291 30 x 96 0.73914 6.15132 1.260 11.4156 25.20
0.0235 48 x 144 0.5969 4.921056 1.008 21.92067 48.39
0.0291 30 x 120 0.73914 6.15132 1.260 14.2695 31.50
0.0291 36 x 120 0.73914 6.15132 1.260 17.1234 37.80
0.0291 36 x 96 0.73914 6.15132 1.260 13.69872 30.24
0.0355 30 x 96 0.9017 7.381584 1.512 13.69872 30.24
0.0291 36 x 144 0.73914 6.15132 1.260 20.55261 45.37
0.0291 48 x 120 0.73914 6.15132 1.260 22.83573 50.41
0.0291 48 x 96 0.73914 6.15132 1.260 18.26496 40.32
0.0291 48 x 144 0.73914 6.15132 1.260 27.40197 60.49
0.0355 30 x 120 0.9017 7.381584 1.512 17.1234 37.80

 

Stainless Steel 904l Vs 304
  • 904l and 304 are two stainless steel grades that can be distinguished by particular characteristics. The chemical composition of 904l SS is maximum 23 percent chromium, maximum 28 percent nickel, and maximum 4 percent molybdenum. The 304 grade, on the other hand, has a maximum chromium content of 20% and a maximum nickel level of 12%.
  • The 904l grade has improved corrosion resistance because to its increased chromium and nickel content, as well as the presence of molybdenum. Because of the molybdenum concentration, this grade is resistant to chloride pitting, which is not feasible with the 304 grade.

 

WERKSTOFF NR. 1.4539 Coil Application
  • Metallurgical Processing
  • Chemical Processing
  • scrubbers for coal-fired power plants
  • Pharmaceutical Industry
  • Oil and Gas Production
  • Seawater and Brackish Water
  • Pulp and Paper

 

 

 

Please let us know
If You Require Any Further Information, Feel Free To Contact Us