AR 400 plate
Ar400 Wear Plate held on stock and delivered throughout the world, check What Is Ar400 Steel Used For ?

- Specification of Ar400 Plate
- Ar 400 Plate Price
- Ar400 Wear Plate Weight
- Most Frequently used types of Ar400 Steel Plate
- Ar 400 F Plate Dimensions
- sizes of Ar Plate 400f
- Ar400 Steel 4x8 Sheet Hardness
- thickness of Ar400 Material
- Ar400 Steel Plate Properties
- What Is Ar400 Steel Used For
- Ar400 Plate Stock list
oldest Ar400 Steel 4x8 Sheet Stockist In Mumbai, Call today for Ar 400 F Plate, there are no minimum order limits
- lower prices
- custom-made products to suit your exact needs
- Supply in Short Lead Times
- Provide Local Service
- expert service
The Ar400 Plate is not a good candidate for machining due to high hardness, however it has a high weldability.
The Ar 400 Plate material is a high carbon steel that comes with a nominal hardness of 400. Measuring the minimum hardness on the Brinell scale, it would be around 360 to 440. The Ar400 Plate is known for its abrasion resistance properties which is enhanced by the quenching and tempering procedures of the forged steel.
The Ar400 Steel Plate can be customized according to the requirements of the clients and is highly demanded across several industries. It is important to choose the Ar400 Plate Supplier wisely- who will use high quality raw material and advanced technologies in the production process and offer the products at a competitive price.
Typically, this steel is used for various applications, like coal in mining or chutes for gravel, rifle range silhouette targets, and heavy equipment liners
Abrasion Resistant 500 has more carbon and manganese content in its chemical composition and thus it has greater hardness compared to Abrasion Resistant 400 steel. Also, while Ar500 has high abrasion resistance, Ar400 possesses more impact resistance.
its Properties would include good impact resistance, abrasion resistance, and hardness that ranges between 360-440 in the Brinell scale.
The Abrasion Resistant 400 materials do not come with a defined chemistry, and hence they are bifurcated depending on the hardness.It’s hardness ranges between 360-440 in the Brinell scale. The hardox 400 goes through the quenching and tempering procedures for an improved wear resistance and hardness. It has a hardness of 450 BHN.
its Welding procedure is the same as that of a mild steel with the same filler material. For example, stick welding would work well in this case.
The primary difference between above grade is in their hardness. Abrasion Resistant 400 has a hardness of 360-440 Brinell, whereas the hardness of Ar450 ranges between 429-495 Brinell. Due to the varied hardness, both the products are used in different applications.
has a hardness ranging between 360-440 Brinell.
Plate Thicknesses can be anywhere between ⅛” to 4”.
- Hardness : 360 to 440 BHN
- Widths: 48” thru 96”
- Lengths: 96” thru 288”
- Thickness: 1/8” thru 4”
- Impact Strength : at -40° F CVNL average values of 15ft. lbs
Description | Price |
Ar 400 Hb 400 Wear Steel Sheet | US $ 910-1000 / Ton |
Ar/Hb 400 Wear Resistant Steel Plates | US $ 620-800 / Ton |
Abrasion Resistant Ar 400 Steel Plates | US $ 805-1183 / Ton |
Bhn 400 Abrasion Resistant Wear Ar Steel Plates | US $ 650 / Ton |
Abrasion Resistant 400 Steel Plates | US $ 730-800 / Ton |
Hot Rolled Ssab Ar 400 Abrasion Resistant Steel Plates | US $ 510-700 / Ton |
plates Thickness | Per Square Inch Weight Lbs.0 | Per Square Foot Weight Lbs.0 |
---|---|---|
1/8″ | .00365 | 5-1/4 # |
1/2″ | .0145 | 20-3/4# |
3/4″ | .0218 | 31-1/4# |
5/16″ | .0083 | 12# |
3/16″ | .0055 | 8# |
1/4″ | .0073 | 10-1/2# |
5/8″ | .0180 | 26# |
3/8″ | .0108 | 15-1/2# |
1″ | .0290 | 41-1/2# |
1-1/4″ | .0363 | 52# |
Abrasion Resistance 500 | Abrasion Resistance 400 |
A 3/8-inch plates weights around 7 pounds per square foot. | Per square foot, a 3/8-inch plate weighs roughly 10 pounds. |
460-544 BHN Typically | 360-440 BHN Typically |
expensive | Cheaper |
Trusted Ar400 Steel Plate Suppliers In Mumbai, keep full range of Ar400 Plate in its many forms, check Machining/ Welding/ Properties

Ar400 Wear Plates

Ar400 Plates

Ar Plate 400f

Ar400 Steel Plates

AR 400 Plates

Ar 400 F Plates
Looking for genuine Ar400 Material Supplier In India, we supply a wide range of Wearalloy AR400 Steel Plate at low cost, so get the correct size
Width | Thickness | Length |
48 | 0.187 | 120 |
96 | 288 | |
48 | 96 | |
60 | 96 | |
60 | 120 | |
48 | 144 | |
72 | 96 | |
96 | 144 | |
96 | 120 | |
96 | 240 |
- 360 to 440 BHN Typically
- 430 to 480 BHN Typically
Width | Thickness | Length" |
48 | 0.375 | 120 |
96 | 288 | |
48 | 144 | |
48 | 96 | |
60 | 120 | |
72 | 96 | |
60 | 96 | |
96 | 144 | |
96 | 120 | |
96 | 240 |
Thickness in Millimetre | Delivery Conditions | Brinell Hardness(HBW) |
---|---|---|
3-100 | Tempered and Quenched | 370-460 |

Wearalloy AR400 Steel Plates
Boubyan Petrochemical, Kuwait

Nm400 Ar400 Wear Plates
Yanbu National Petrochemical Co., Saudi Arabia

Hot-Rolling Ar400 Wear Resistant Steel Plate
Berkshire Hathaway, Oman
|
|
- Machining = Fair
- Bending = Good
- Corrosion Resistance = Good
- Welding = Excellent
- Wear Resistance
We have an extensive stock of Ar Plate 400f to meet your specific requirements, view Ar 400 Plate Weight/Hardness/Thickness
- Storage Bin Liners
- Material Transfer Chute Liners
- Bucket Liners
- Dump Truck Liners
- Hoppers
Brand | C.E.V. Typical Values | Manufacture/Co | HARDNESS RANGE |
Thk: 10 – 20 | Values for AR 400 | ||
Hardox 400 | 0.37 | SSAB | 370 to 430 |
SUMIHARD K400 | 0.46 | SUMITOMO METALS | 400 to 440 |
QUARD 400 | 0.42 | DUFERCO | 370 to 430 |
RAEX 400 | 0.43 | RUUKKI | 360 to 430 |
JFE EVERHARD 360LE | 0.38 | JFE STEEL CORPN. | 360 to 430 |
DILLIDUR 400V | 0.43 | DILLINGER HUTTE | 370 to 430 |
ABRAZO 400 | 0.43 | TATA UK LTD. | 360 to 430 |
BRINAR 400 | 0.48 | ILSENBURGER GROBBLECH | 360 to 430 |
FORA 400 | 0.48 | INDUSTEEL | 360 to 430 |
XAR 400 | 0.43 | THYSSEN KRUPP | 370 to 430 |
NICRODUR 400 | 0.56 | ACRONI | 360 to 430 |
HARDPLAST 380 | 0.56 | ISD HUTA | 360 to 430 |
Abrex 450 | 0.5 | NSSMC | 410 to 490 |
Abrex 500 | 0.55 | NSSMC | 450 to 550 |
CREUSABRO 4800 | 0.48 | INDUSTEEL | 360 to 430 |
WELHARD 400 | 0.46 | NSC/JAPAN | 400 to 440 |
BIS Plate 320 | 0.4 | Bisalloy Steels Pty Ltd | 320 to 360 |
Rockstar 400 | 0.45 | Essar Steel India Ltd. | 370 to 430 |
BIS Plate 400 | 0.4 | Bisalloy Steels Pty Ltd | 370 to 430 |
BIS Plate 450 | 0.48 | Bisalloy Steels Pty Ltd | 425 to 475 |
Abrex 400 | 0.4 | NSSMC | 360 to 440 |
Rockstar 450 | 0.52 | Essar Steel India Ltd. | 425 to 475 |
Rockstar 500 | 0.6 | Essar Steel India Ltd. | 450 to 540 |
Abrex 600 | 0.73 | NSSMC | 550 to 650 |
Thickness | 1.50- 3.00 |
.250- .750 |
.188- .250 |
.750- 1.00 |
Manganese | 1.50 | 1.50 | 1.50 | 1.50 |
Carbon | 0.25 | 0.17 | 0.20 | 0.17 |
Phosphorus | 0.025 | 0.025 | 0.025 | 0.025 |
Silicon | 0.50 | 0.50 | 0.50 | 0.50 |
Sulfur | 0.005 | 0.005 | 0.005 | 0.005 |
Molybdenum | 0.60 | 0.20 | 0.05 | 0.20 |
Chromium | 0.20 | 0.20 | 0.45 | 0.60 |
Boron | 0.003 | 0.003 | - | 0.003 |
Hard Black BHN |
Yield Strength in Unit (MPa) | Tensile Strength in Unit (MPa) | Elongation in Percentage |
---|---|---|---|
350-440 | 1150 MPa | 1300 MPa | ≥12 |
© Copyrights 2022 Sambhav Pipes & Fittings. All rights reserved.