Ar235 Plate Supplier
Lowest Price Ar Medium Plate Supplier, Supply High Quality Ar235 Steel Material With Outstanding Performance
- Ar235 Plate Specification
- Price of Ar235 Steel Plate
- list of Ar Medium Plate Types
- Welding Ar235 Plate
- Ar235 Steel Plate Properties
- Size chart of AR235 Abrasion-Resistant Steel Plate
- Ar235 Steel Plate Features
- Ar Medium Plate Thickness
- Alloy Ar235 Plate Dimensions
- AR235 Sheet tolerances
- Weight Chart of Ar235 Steel Plate
- Abrasion Resistant 235 Plate Application
As a stockist, we have AR235 Abrasion Resistant Carbon Plate in stock; discover more about welding Ar235 Plate.
The disadvantage is it is less ductile.
it has a good hardness and abrasion resistance.
it can be welded using the conventional electric arc welding procedure.
it is an abrasion resistant grade , which is used for higher and tougher material. The grade includes Abrasion Resistant 200 and 235 steel, which comes with a hardness of 180-260 BHN. The hardness and other properties of the ARMED makes it suitable for different types of wear resistant applications.
In fact, this grade is perfect for services which require more wear resistance than what is offered by the mild carbon steel grades. However, it cannot offer so high wear resistance to be used in the mining equipment.
Abrasion Resistant 235 steel grade can be defined as an abrasion-resistant as-rolled carbon steel which has a very high carbon content. This is a low cost material which possesses good abrasion resistance properties, and hence demanded for several applications across different industries. It possesses a hardness of around 235 BHN.
This grade comes with a nominal hardness of 400.
It is a carbon steel used in the chutes for gravel or in mining. With a high abrasion resistance, they can also be used as the liners of heavy equipment or in the rifle range silhouette targets.
it is an abrasion resistance material that has a high carbon content. It is one of the most affordable materials which is required for applications where abrasion rate is high. It has a prolonged service and is very suitable for applications where wearing is an issue.
It helps in extending the service life of critical components, and thus can be a part of applications that involve impact or sliding. They come with good machining, forming, and welding properties. But no heat treatment should be applied on it.
Both are steel grades which fall under the Ar Medium category. While Ar200 has nominal hardness of 200, that for Ar235 is 235. Both are abrasion-resistant steel with high carbon content and they have long service life. But the Abrasion Resistant 235 is harder than the Ar200 material.
Abrasion Resistant 225 comes with a nominal hardness of 235, whereas Ar235 comes with a nominal hardness of 235. This means that Ar235 is harder and tougher compared to the Abrasion Resistant 225 material.
|Weight per piece||
|Width (in.)||Thickness (in.)||Length (in.)||Price Each|
Sambhav Pipes is one of India's oldest Ar235 Steel Plate Suppliers situated in Mumbai, check price in india.
AR 235 Plates
AR235 Alloy Steel Plates
AR235 Abrasion-Resistant Steel Plates
AR Medium Steel Plates
AR235 Steel Plates
For a material test certificate and a sample of Alloy Ar235 Plate, please contact us.
- Tensile: Typical – Not Intended For Structural Use 90 ksi
- Brinell: 180 min/ 235 nominal
- Yield: Typical – Not Intended For Structural Use 70 ksi
|GAUGE (INCHES)||WIDTH (INCHES)||LENGTH (INCHES)|
Ar Medium Plate
Chevron Oronite, Singapore
Alloy Abrasion Resistant 235 Plates
LG Chem, USA
Ar235 Steel Plate
Imperial Oil Limited, Canada
- surface hardness is 185-255 BHN
- It's made for moderate wear and shouldn't be utilised for structural or load-bearing purposes.
- The content of mills varies. A surface hardness report is included with every order.
|3/16" to 1"||48" to 120"||96" to 480"|
|# Per Sq. Foot||AR235 Plates|
|8 per sq. ft.||3/16|
|25.9 per sq. ft.||5/8|
|10.3 per sq. ft.||1/4|
|41.5 per sq. ft.||1|
|15.5 per sq. ft.||3/8|
|31.1 per sq. ft.||3/4|
|20.6 per sq. ft.||1/2|
Carbon Steel AR235 Sheet Material comes in a range of cut-to-length to suit the demands of the customer.
|wide sheet metal 1250 mm||Thickness||wide sheet metal 1000 mm|
|0.08 mm||1.2 to 1.49||0.07 mm|
|0.09 mm||1.5 to 1.99||0.08 mm|
|0.06 mm||0.8 to 0.99||0.055 mm|
|0.12 mm||2.5 to 2.99||0.11 mm|
|0.14 mm||3.0 to 3.99||0.13 mm|
|0.05 mm||0.6 to 0.79||0.05 mm|
|0.07 mm||1.0 to 1.19||0.06 mm|
|Lbs. Per Square Foot Weight||Thickness||Lbs. Per Square Inch Weight|
|5-1/4 # per sq. ft.||1/8″||.00365|
|8# per sq. ft.||3/16″||.0055|
|10-1/2# per sq. ft.||1/4″||.0073|
|12# per sq. ft.||5/16″||.0083|
|20-3/4# per sq. ft.||1/2″||.0145|
|26# per sq. ft.||5/8″||.0180|
|15-1/2# per sq. ft.||3/8″||.0108|
|31-1/4# per sq. ft.||3/4″||.0218|
|41-1/2# per sq. ft.||1″||.0290|
|52# per sq. ft.||1-1/4″||.0363|
- truck liners
- material chutes
|Tensile Strength, Ultimate||621 MPa||90,000 psi|
|Tensile Strength, Yield||483 MPa||70,000 psi|
© Copyrights 2022 Sambhav Pipes & Fittings. All rights reserved.