24/7 Phone Services +91 7045400008
sales@sambhavpipes.com Opera House Charni Road East, Girgaon, Mumbai

SA 516 Gr 60N Plate

We are one of the India's largest high quality ASTM A516 Grade 60N NACE+HIC Boiler Plate Supplier, contact us to request a quote

 

SA 516 Gr 60N Plate

 

Table of Content

 

Looking for specific size in Sa 516 Gr 60n + Hic Plate ? As Stockist keep stock of SA 516 GR.60N NACE MR0103/MR0175 Plate with Price List.

 

SA 516 Gr 60N Plate

 

Why SA 516 Gr 60N Plate from Sambhav Pipes ?
  • In comparison to any other Indian supplier, we offer a 15% discount.
  • Material Approved by the NABL
  • SA 516 Gr 60N Plate has been supplied to 35 countries for over 20 years.
  • To reduce wastage and to get the cheapest price in India, cut to custom sizes are available.
  • a rejection rate of less than 1%
  • We stick to our quotes even if the price rises after the purchase order is finalized.

 

What is ASTM A516

ASTM A516 is the standard specification for carbon steel, pressure vessel plates. It is used for services occuring at a moderate or low temperature. The plates in this specification are used in the pressure vessel applications, where excellent notch toughness is an essential requirement. The steel is available in different grades and they come with specific properties due to their chemical composition. For example, the ASTM A516 Grade 60 can be ideally used in pressure vessels for low to moderate temperature services. Whereas, the ASTM A516 Grade 65 is mostly used for the fabrication pressure vessel and boiler. They are used in lower than ambient temperature services.

 

what is sa 516 gr 60 n density

The sa 516 gr 60 n density is 7.80 g/cc.

 

What is SA 516 Gr 60N Plate ?

The SA 516 gr 60n plate comes with a high weldability and they show good resistance to brittle cracking. The material is particularly used for manufacturing pressurized gas vessels, pressure vessels, pressure piping, and so on. The sa 516 gr 60n + hic material is most widespreadly used in applications that occur in an environment that is lower than -20 degrees C.

The sa 516 gr 60n material is generally supplied in a normalized condition, between the normalizing temperatures of 900-950 degrees C. Because of this process, the sa 516 grade 60n material offers good hot and cold forming properties, and that too without impacting any of the material properties. Due to the fine grain structure of the astm a516 gr.60 n steel, they can be easily welded using the traditional welding procedures.

 

Why sa 516 gr 60n material used for pressure vessels

The 516 gr 60n material is used for pressure vessels as they have good weldability and high hardness which is required for such applications.

 

Specification of Astm A516 Gr.60 N
Material (Normalized condition) ASME SA 516/ASTM A516 Gr 60N Plate
Dimensions
  • Width: Up to 130 Inches
  • Thickness: 0.1875 - 3.54 Inches
  • Length: Up to 1020 Inches
Test certificates NACE and EN 10204 2.2/3.1, HIC Tested, EN10204 3.2 
Delivery Conditions
  • Suitable for cold forming (C)
  • As-rolled (+AR) - less than 40mm
  • Normalised rolling (+N) - 40mm and above
  • Suitable for post-galvanising (Class 1)
  • pickled and oiled
  • pickled
  • Trimmed edges
  • Mill edges
  • non-pickled
Brands JSPL, JSW, TATA, Essar, POSCO, Uttam, SAIL, Clabecq, Thyssen, Dillinger, and Mills
Uses
  • Boiler
  • Construction
  • Energy & Power Industry
  • Pressure Vessel
  • Storage Tanks

 

We are Stocking Distributors of below

Stocking Distributors

 

Sa 516 Gr 60 N Density

The density of the Sa 516 Gr 60 N grade is 7.80 grams per cubic centimeter.

 

Price list of SA 516 Gr 60N Plate
Description Price
Sa 516 Gr 60n Material US $800-3000 / Metric Ton( FOB Price)

astm a516 gr.60 n Plates

US $800-4000 / Metric Ton( FOB Price)
ASME SA 516 GR.60N NACE and HIC Plates US $560-670 / Ton( FOB Price)
ASME SA516 Grade 60N NACE HIC Boiler Plates US $800-3000 / Metric Ton( FOB Price)
A516 Grade 60n Hic Nace Tested Plates US $800-4000 / Metric Ton( FOB Price)
SA 516 gr 60n + Hic Plates US $560-670 / Ton( FOB Price)
Astm A516 Gr.60n Nace+hic Boiler Quality Steel Plates
US $800-3000 / Metric Ton( FOB Price)

 

stocking distributors of Astm A516 Gr.60 N Platein almost any size or quantity can be Supply with short lead times.see Sa 516 Gr 60 N Density

 

list of Sa 516 Grade 60n Plate Types
516 Grade 60N HIC NACE Tested Plates
516 Grade 60N HIC NACE Tested Plates
ASTM A516 Grade 60 N Plates
ASTM A516 Grade 60 N Plates
SA 516 Gr.60N NACE+HIC Plates
SA 516 Gr.60N NACE+HIC Plates
SA 516 Gr 60n + Hic Plates
SA 516 Gr 60n + Hic Plates
SA 516 Gr 60N Plate
SA 516 Gr 60N Plates
SA 516 Gr 60n Material
SA 516 Gr 60n Material

 

Sa 516 Gr 60n + HIC Plate thickness
SA 516 Gr 60N Plates Width SA 516 Gr 60N Plates Thickness SA 516 Gr 60N Plates Length
2000 5 6000
2000 4 6000
2500 6 6000
2000 6 6000
2500 8 6000
2000 10 6000
2000 8 6000
2000 40 6000
2000 15 6000
2000 12 6000
2000 20 6000
2000 16 6000
1800 60 3400
2000 32 6000
2000 25 6000
2000 50 6000

 

A516 Grade 60N Plate Weight Calculator

Please enter values then click on Calculate.

Length (inches) =
Width (inches) =
Thickness (inches) =
 
Weights (pounds) =

All are estimates; actual may differ.

 

we at Sambhav Pipe specialize in offering Sa 516 Grade 60n Plate, provide the best quality range of ASME SA516 GRADE 60N Boiler Quality Steel Plates

 

A516 Grade 60N NACE+HIC Boiler Plate Weight
Size in In. Weight per Square Foot. in Lbs.
3/16 x 36 7.660
3/16 x 96
3/16 x 48
3/16 x 84
3/16 x 54
3/16 x 72
3/16 x 120
3/16 x 60
1/4 x 60 10.210
1/4 x 48
1/4 x 84
1/4 x 36
1/4 x 72
1/4 x 96
5/16 x 36 12.760
1/4 x 120 10.210
5/16 x 96 12.760
5/16 x 120
5/16 x 60
5/16 x 48
5/16 x 72
3/8 x 60 15.320
3/8 x 84
3/8 x 120
3/8 x 72
3/8 x 36
3/8 x 48
3/8 x 96 15.320
1/2 x 48 20.420
7/16 x 84 17.870
1/2 x 60 20.420
1/2 x 84 20.420
3/16 x 96 17.870
1/2 x 96 20.420
1/2 x 120 20.420
1/2 x 72 20.420
9/16 x 84 22.970
9/16 x 96 22.970
5/8 x 72 25.530
5/8 x 48
5/8 x 60
5/8 x 120
5/8 x 96
5/8 x 84
3/4 x 72 30.630
3/4 x 48
3/4 x 84
3/4 x 120
3/4 x 60
7/8 x 72 35.740
7/8 x 84 35.740
1 x 48 40.840
3/4 x 96 30.630
1 x 60 40.840
1 x 72 40.840
7/8 x 96 35.740
1 x 120 40.840
1 x 96
1 x 84
1 1/8 x 84 45.950
1 1/8 x 78
1 1/8 x 96
1 1/8 x 60
18 x 60 735.000
1 1/4 x 60 51.050
1 1/4 x 48
1 1/4 x 72
1 1/4 x 84
1 1/4 x 96
1 1/4 x 120
1 3/8 x 96 56.160
2 x 48 81.680
1 3/8 x 84 56.160
1 3/4 x 96 71.470
1 1/2 x 48 61.260
1 1/2 x 72
1 1/2 x 84
1 1/2 x 60
1 1/2 x 120 61.260
1 3/4 x 72 71.470
1 1/2 x 96 61.260
1 5/8 x 96 66.370
1 5/8 x 84 66.370
1 3/4 x 84 71.470
2 1/4 x 72 91.890
2 x 60 81.680
2 x 84 81.680
2 1/2 x 60 102.100
2 x 72 81.680
2 x 96 81.680
2 1/8 x 96 86.790
2 1/4 x 96 91.890
2 1/2 x 96 102.100
2 1/4 x 84 91.890
2 3/4 x 72 112.300
2 3/4 x 84 112.300
2 1/2 x 72 102.100
3 1/2 x 72 142.900

 

know more about our clients worldwide
Sa516 Grade 60n Hic Resistant Steel Plate
Sa516 Grade 60n Hic Resistant Steel Plate
ABC Global, Mexico
A516 Grade 60n Carbon Steel Nace And Hic Tested Plates
A516 Grade 60n Carbon Steel Nace And Hic Tested Plates
Al Sanea Chemical, Kuwait
ASME SA516 GRADE 60 Boiler Quality Steel Plates
ASME SA516 GRADE 60 Boiler Quality Steel Plates
BASF, Germany

 

SA516 Grade 60n Hic Nace Tested Plate Dimension
Grade SA 516 Gr 60N Plate Material Type Thickness in Inches SA 516 Gr 60N Plate Length in Inch
SA 516 Grade 60N Plate (Normalized) Mill Plates 0.188 - 3.54 Inch 154 - 1020 Inch
SA 516 Grade 60N Plate (Normalized) Temper Leveled SA 516 Gr 60N Plates 0.100 - 0.500 Inch 72 - 720 Inch
  SA 516 Gr 60N Coil for Conversion To 4) 0.188 - 0.500 Inch  

 

Sa 516 Gr 60n Material available according to international standards. Before Buy Check Price list

 

Industrial Application of Sa 516 Gr 60n Material
  • propane tanks
  • Used for weld fabrication of pressure vessels
  • pressure piping
  • parts for steam boilers
  • pressure vessel
  • compressors

 

Mechanical Properties of ASTM A516 Gr 60N Material
SA 516 Gr 60N Plate Element Normalized Condition (N)
Elongation minimum, % 50 mm (2 in) 25%
Elongation minimum, % 200 mm (8 in) 21%
Yield Stress, min MPa (ksi) 220 MPa (32 ksi)
Tensile Stress, MPa (ksi) 415 - 550 MPa (60 - 80 ksi)

 

Equivalent of SA516 Grade 60 Boiler Quality Steel Plates
Standard SA 516 Gr 60N Plate Description
European EN EN10028 P265GH
DIN DIN 17155 HII
ASME/ ASTM SA516 / A516 Grade 60N (Normalized)
British BS1501-161-430A

 

Astm A516 Gr.60 N Plate Chemical Composition
ELEMENT SA 516 Gr 60N Plate COMPOSITION (%) SA 516 Gr 60N Plate Condition SA 516 Gr 60N Plate THICKNESS (mm)
Manganese (Mn) 00.60 - 0.90   12.5 and under
  00.55 - 0.98   12.5 and under
  00.85 - 1.20   over 12.5
  00.79 - 1.30   over 12.5
Carbon maximum 00.21 Normalized 12.5 and under
  00.23   over 12.5 to 50
  00.25   over 50 to 100
  00.27   over 100
Sulphur (maximum) 00.025    
Phosphorus (maximum) 00.025    
Silicon (Si) 00.15 - 0.40    
  00.13 - 0.45    

 

Please let us know
If You Require Any Further Information, Feel Free To Contact Us